1. Net Metering vs. Net Billing in Maharashtra
Under Maharashtra Electricity Regulatory Commission (MERC) Grid Interactive Rooftop Renewable Energy Regulations, eligible residential and C&I consumers in MSEDCL, Tata Power, and Adani Electricity jurisdictions can synchronize rooftop solar with the distribution grid.
- Net Metering: Surplus exported kWh units offset imported kWh units on a unit-to-unit basis within the billing cycle (subject to prevailing MERC kW caps and consumer category rules).
- Net Billing / Behind-the-Meter: Typically applied to higher-capacity C&I plants beyond net-metering thresholds, where exported energy is credited at a regulated feed-in rate while self-consumed solar offsets high commercial/industrial tariffs directly.
2. Step-by-Step MSEDCL Portal Workflow
- Consumer Verification: Verify consumer name match, sanctioned load (kW/kVA), and zero arrears on the latest MSEDCL bill.
- Online Application & Technical Feasibility: Submit rooftop solar capacity request on the DISCOM / National Portal for distribution transformer (DT) capacity check.
- EPC Execution & Documentation: Complete installation using ALMM-compliant modules, BIS inverters, and IS 3043 earthing; submit Net Metering Agreement, SLD, and IEC 62446 commissioning test sheet.
- Meter Testing & Synchronization: Procure/test bi-directional net meter and solar generation meter through DISCOM lab, followed by site sealing and billing-cycle activation.
Regulatory Note: Statutory caps, processing fees, CEIG inspection thresholds, and subsidy procedures change periodically by MERC/MNRE circulars. Always verify current rules during your physical site survey.
ROOFITPV Engineering Note: Technical guidance above reflects standard Indian Solar PV EPC practice across Maharashtra. Final sizing, DISCOM rules, and subsidy eligibility are verified site-by-site during physical survey.