INTEGRATED ENERGY ECOSYSTEM:
ILLUSTRATIVE EPC SCOPES · RPV-01 TO RPV-12

Representative Solar EPC System Architectures

Explore 12 structured technical blueprints illustrating how ROOFITPV engineers residential, society, commercial, industrial, ground-mounted, commissioning, and O&M scopes.

12 items
Transparency Notice: All 12 items below (RPV-01 to RPV-12) are presented as Illustrative EPC Scopes or Representative System Architectures to demonstrate hardware standards, mounting geometry, electrical protection, and commissioning deliverables. Actual site sizing and yield vary by premises.
RPV-01 Illustrative EPC Scope

5 kWp Residential RCC Rooftop On-Grid System

Capacity: 5 kWp · Type: RCC Flat Roof

On-grid residential rooftop system using ALMM Mono-PERC/TOPCon modules, elevated GI structure, and MSEDCL net metering.

Open Technical Specification →
RPV-02 Illustrative EPC Scope

10 kWp Villa Hybrid Solar + Lithium Storage

Capacity: 10 kWp + 15 kWh · Type: Sloped / RCC Villa

Hybrid solar architecture with LiFePO4 battery bank serving critical villa loads during grid outages with net-metering export.

Open Technical Specification →
RPV-03 Representative System Architecture

30 kWp Housing Society Common-Area Solar

Capacity: 30 kWp · Type: CHS High-Rise Terrace

Elevated pergola rooftop array designed to offset cooperative housing society lift, water-pump, and corridor lighting bills.

Open Technical Specification →
RPV-04 Illustrative EPC Scope

50 kWp Commercial Office Elevated Carport Solar

Capacity: 50 kWp · Type: Elevated Carport / Pergola

Dual-purpose shaded parking carport structure integrating bifacial modules and 3-phase string inverters.

Open Technical Specification →
RPV-05 Illustrative EPC Scope

100 kWp Factory Metal-Shed Flush-Mounted Solar

Capacity: 100 kWp · Type: Trapezoidal Tin Shed

Non-penetrating/leak-proof flush aluminum rail mounting on industrial PEB shed with zero-downtime LT synchronization.

Open Technical Specification →
RPV-06 Representative System Architecture

250 kWp MIDC Industrial Captive Solar Plant

Capacity: 250 kWp · Type: Industrial Shed + LT/HT

Multi-inverter industrial rooftop plant integrated with existing PCC panel and CEIG statutory approval via AAROHAN ELECTRICALS.

Open Technical Specification →
RPV-07 Representative System Architecture

500 kWp Warehouse Rooftop Net-Billing System

Capacity: 500 kWp · Type: Standing-Seam Warehouse

Large-span logistics warehouse solar array featuring string-level monitoring, walkway catwalks, and rapid-shutdown safety.

Open Technical Specification →
RPV-08 Illustrative EPC Scope

100 kWp Hospital DG-Synchronized Zero-Export Solar

Capacity: 100 kWp · Type: Institutional RCC Roof

Behind-the-meter solar plant with active DG-PV synchronization controller preventing reverse power flow into hospital DG sets.

Open Technical Specification →
RPV-09 Illustrative EPC Scope

75 kWp Educational Campus Rooftop Solar

Capacity: 75 kWp · Type: Multi-Block RCC Roofs

Distributed rooftop solar across academic blocks with centralized SCADA generation display for campus sustainability.

Open Technical Specification →
RPV-10 Representative System Architecture

1 MW Ground-Mounted Industrial Solar Architecture

Capacity: 1,000 kWp (1 MW) · Type: Open Industrial Land

Fixed-tilt galvanized ground-mount solar plant with central/multi-string inverters, perimeter fencing, and HT transformer yard.

Open Technical Specification →
RPV-11 Illustrative EPC Scope

Solar Net-Metering & Bi-Directional Meter Commissioning

Capacity: 10 kWp – 500 kWp · Type: DISCOM Grid-Tie

End-to-end MSEDCL portal registration, technical feasibility, IEC 62446 commissioning test pack, and bi-directional meter sync.

Open Technical Specification →
RPV-12 Illustrative EPC Scope

Annual Solar Preventive O&M & Cleaning Program

Capacity: 50 kWp – 1 MW+ · Type: Existing Solar Plants

Structured 24-visit annual cleaning, IV/IR testing, thermography, earthing resistance audit, and monthly PR deviation tracking.

Open Technical Specification →
WhatsApp